[Kenwood] deaf 850

Mon, 21 Jul 2003 13:43:55 -0400

I hope you have a manual.
Open up the bottom and find the RF board.
On it there is a small board  X59-3900-00.
This board switches 12v depending on what you do.
Pin 6 of this board is the input 12volt.
Pin 9 switches 12 volt  on during receive and 0 volt during transmit.
This board goes bad, it costs $12.
Let us know what you did.
WA1WLA

----- Original Message ----- 
From: "Mike Brown" <[email protected]>
To: "KENWOOD" <[email protected]>
Sent: Monday, July 21, 2003 1:13 PM
Subject: [Kenwood] deaf 850

> Out of the blue, I turned my 850 on, and it's about
> 2/3 rd's deaf. Clif is not accepting anything right
> now due to moving, and wanting to clear out the
> backlog. Any ideas on what might have went wrong,
> or where I could send it? Is Kenwood still working
> on the 850 and what is the overall consensus of
> Kenwood's repair shop? 
> 
> Thanks.. Mike K9MI
> 
> 
> 
> 
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.502 / Virus Database: 300 - Release Date: 7/18/2003
> - - -
> 
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
> 
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood