[Kenwood] TS-830S Problems 2 diff. 830S'

[Les Severson]

Hi Clif,

BINGO !!!!
Several clicks of the Proc switch brought everything back to normal..
You have my sincere gratitude !
Best 73,   Les,  W�OJH

-----------------------------------------------------------------------

Clif wrote:
> Sounds like something "went away" Have you tried cycling the Proc switch
> rapidly several times. They are prone to failure and the TX audio is routed
> thru it. Try that and let me know.
> 
> Clif Holland,  KA5IPF
> AVVid
> Authorized Kenwood and Icom Service
> www.avvid.com
> 1-800-214-5779
> 972-554-6801
> ----- Original Message -----
> From: "Les Severson" <les99a@rconnect.com>
> To: "Clif Holland" <clif@avvid.com>
> Sent: Monday, January 13, 2003 9:17 PM
> Subject: Re: [Kenwood] TS-830S Problems 2 diff. 830S'
> 
> 
> 
>>Hi Clif,
>>
>>Tnx for writing..
>>
>>The ALC reading is very low with the mic gain cranked way up.
>>My mic is an MC-60A with the internal amp shut off.  I tried a different
>>mic but results were the same.   This happened all the sudden a few days
>>ago.  I am kinda assuming that something has gone awry in the audio
>>driver section.    BTW,  The RF output meter I'm using is a "Dosy" peak
>>reading meter.  It may not be perfectly accurate but it gives me a good
>>ballpark reading.

>>>