[Kenwood] Antenna tuner question

Thu, 20 Feb 2003 09:30:23 -0500 (EST)

One suggestion, is to get a 4:1 Current Balun from Radio Works and hang it
outside the shack.  This will provide a conversion from the ladder line to
coax for entry into the shack.  It might also redduce the RF in the shack.
Many AT's include a similar balun to allow connection of balanced line to
the tuner.  Look on the web for www.radioworks.com .

.........bc    ([email protected]

       http://www.widomaker.com/~conk
Williamsburg, VA 23185

On Wed, 19 Feb 2003, Lloyd wrote:

> Hi
> I am new to this list.
> Question: I have aquired a AT-200 tuner to use with my TS-520. I am
> currently using a MFJ 949C into 450 ohm ladder line connected to an unnamed
> vertical. Seems to work fine. I noticed the AT-200 does not have a ballanced
> line ourput. How can I run 450 ohm ladder out of it to my antenna.
> Incidently a short 40-10 meter 3 element beam goes in the air in March.
> Lloyd Godsey  KK7IZ
> 1315 N. Udall Circle
> Mesa, Az  85203
>
> 1-480-620-7145 (cell)
>
> Please visit my web page
> http://members.cox.net/kk7iz/kk7iz/index.htm
>
> [email protected]
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood
>