[Kenwood] neutralizing question, TS-830S

Wed, 19 Feb 2003 16:41:17 -0600

If your Kenwood is like my 530S, your 10 meter and 15 meter trouble =
might just be a dirty band switch. Try cleaning it and see if you =
suddenly get output..

Dunno the answer to your question - I see they recommend 28.5 for =
neutralizing in the manual and the service guide for the 530S. I assume =
there must be some logic to it. I have new finals for mine that I will =
install once I borrow somebody's 10 meter rig so I can check signal =
strength for neutralizing.

73's
Bill Kuhn
KC0NYL

-----Original Message-----
From: Les Severson [mailto:[email protected]]
Sent: Wednesday, February 19, 2003 1:43 PM
To: kenwood
Subject: [Kenwood] neutralizing question, TS-830S

Hi All,
Time has come on the ol' TS830S to change the finals..  The originals
held up great til now..

Question:  The book says to tune to 28.5 mc for neutralizing with the=20
new tubes but this rig has no output on 10 meters (nor 15 meters) Hasn't =

had for years..  Never looked into because I don't care about those=20
bands anyway... hi    Anyway, what is special about neutralizing on=20
28.5mc ?
Can't it be neutralized on any frequency ... like maybe 14.2 ?

Just curious...   Tnx & 73,   Les,  W=D8OJH

- - -

Your moderator for this list is:
Larry Wilson KE1HZ [email protected]

_______________________________________________
Kenwood mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/kenwood