[Kenwood] dipswitsh settings dsp100

Fri, 11 Apr 2003 15:59:35 -0500

Ahhha, unless you know about what some people do with those .....they are
ALL in the UP position (at least that is where Kenwood meant them to be)!

You might want to look at KAOKA's page if you want to take a peep into a
different world where some people use the DSP-100 for wideband SSB audio! I
have a manual  and  can tell you what each one does. Let me know if you are
interested.

In case you did not know, the DSP-100 is a much sought after item worth
450-500$ to some! I would hate it if you didn't know and someone took
advantage of you! I looked all around the world before I found one at ebay
and won it at 406$ a year ago! I suspect you will get a fllod of mail!

73,
Ron, 6Y5/4S7RO

----- Original Message -----
From: "Omer Van den Hende" <[email protected]>
To: <[email protected]>
Sent: Friday, April 11, 2003 4:00 AM
Subject: [Kenwood] dipswitsh settings dsp100

> Hi  list
>
> I am playing with a dsp 100 and i have no user or so manual
> So i am in dubt with those settings on the rear panel
> It seems to be not so effective or  there is something wrong  or i do
> something wrong as well
> The TS850 is working fine ... and the cables properly connected
>
>
>
>
>
> ----- Original Message -----
> From: <[email protected]>
> To: <[email protected]>
> Sent: Friday, April 11, 2003 10:01 AM
> Subject: Kenwood digest, Vol 4 #104 - 5 msgs
>
>
> > Send Kenwood mailing list submissions to
> > [email protected]
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://mailman.qth.net/mailman/listinfo/kenwood
> > or, via email, send a message with subject or body 'help' to
> > [email protected]
> >
> > You can reach the person managing the list at
> > [email protected]
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of Kenwood digest..."
> >
> >
> > Today's Topics:
> >
> >    1. Kenwood 850ATS (full carrier out in SSB) (Bill Smith)
> >    2. Re: Kenwood 850ATS (full carrier out in SSB) (Dr. Gerald N.
Johnson,
> electrical engineer)
> >    3. R599 manual (Bill M Jenkins)
> >    4. RE: Kenwood 850ATS (full carrier out in SSB) (Robert Mackie)
> >    5. R599 manual - schematics source (Rodney Bunt)
> >
> > --__--__--
> >
> > Message: 1
> > Date: Thu, 10 Apr 2003 09:43:10 -0700 (PDT)
> > From: Bill Smith <[email protected]>
> > To: [email protected]
> > Subject: [Kenwood] Kenwood 850ATS (full carrier out in SSB)
> >
> > Last night I noticed that when I key the microphone in
> > the SSB mode and talk I get a full carrier out.  The
> > power climbs up quickly, but doesn't jump up like you
> > are in the CW mode.  This is happening in the 80 meter
> > band for now.
> >
> > I'll do more testing tonight.
> >
> > Anyone have this problem with theirs?
> > 73,
> > Bill Smith KO4NR
> >
> > =====
> > Bill Smith KO4NR
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Tax Center - File online, calculators, forms, and more
> > http://tax.yahoo.com
> >
> > --__--__--
> >
> > Message: 2
> > Date: Thu, 10 Apr 2003 11:30:55 -0500
> > From: "Dr. Gerald N. Johnson, electrical engineer" <[email protected]>
> > Reply-To: [email protected]
> > Organization: Gerald N. Johnson
> > To: Bill Smith <[email protected]>
> > Cc: [email protected]
> > Subject: Re: [Kenwood] Kenwood 850ATS (full carrier out in SSB)
> >
> > Can't be sure about the 850, but TS-120 and TS-130 like to oscillate on
> > the high bands when the RF board mounting (and grounding) screws get
> > loose from vibration and from plastic flow of the printed circuit board
> > material. So I'd try a screwdriver on the board mountings.
> >
> > 73, Jerry, K0CQ
> >
> > --
> > Entire content copyright Dr. Gerald N. Johnson, electrical engineer.
> > Reproduction by permission only.
> >
> > --__--__--
> >
> > Message: 3
> > To: [email protected]
> > Date: Thu, 10 Apr 2003 14:14:42 -0500
> > From: Bill M Jenkins <[email protected]>
> > Subject: [Kenwood] R599 manual
> >
> > Hi to all. Where can I find a manual or at least a schematic for the
> > Kenwood R599? All help is very much appreciated.
> > Bill
> > W5ICS
> >
> > ________________________________________________________________
> > Sign Up for Juno Platinum Internet Access Today
> > Only $9.95 per month!
> > Visit www.juno.com
> >
> > --__--__--
> >
> > Message: 4
> > To: [email protected]
> > Subject: RE: [Kenwood] Kenwood 850ATS (full carrier out in SSB)
> > Reply-To: [email protected]
> > From: "Robert Mackie" <[email protected]>
> > Cc:
> > Date: Thu, 10 Apr 2003 23:01:30 -0400 (EDT)
> >
> >
> > Also check for rf feeding back into your rig during transmit.
> >
> > Bob Mackie - N0CDY
> >
> >
> >
> >
> >  --- On Thu 04/10, Bill Smith < [email protected] > wrote:
> > From: Bill Smith [mailto: [email protected]]
> > To: [email protected]
> > Date: Thu, 10 Apr 2003 09:43:10 -0700 (PDT)
> > Subject: [Kenwood] Kenwood 850ATS (full carrier out in SSB)
> >
> > Last night I noticed that when I key the microphone in<br>the SSB mode
and
> talk I get a full carrier out.  The<br>power climbs up quickly, but
doesn't
> jump up like you<br>are in the CW mode.  This is happening in the 80
> meter<br>band for now.<br><br>I'll do more testing tonight.<br><br>Anyone
> have this problem with theirs?<br>73,<br>Bill Smith
> KO4NR<br><br>=====<br>Bill Smith
> KO4NR<br><br>__________________________________________________<br>Do you
> Yahoo!?<br>Yahoo! Tax Center - File online, calculators, forms, and
> more<br>http://tax.yahoo.com<br>- - -<br><br>Your moderator for this list
> is:<br>Larry Wilson KE1HZ
>
[email protected]<br><br>_______________________________________
> ________<br>Kenwood mailing
>
list<br>[email protected]<br>http://mailman.qth.net/mailman/listinfo/k
> enwood<br>
> >
> > _______________________________________________
> > Join Excite! - http://www.excite.com
> > The most personalized portal on the Web!
> >
> > --__--__--
> >
> > Message: 5
> > Date: Thu, 10 Apr 2003 20:50:44 -0700 (PDT)
> > From: Rodney Bunt <[email protected]>
> > Subject: [Kenwood] R599 manual - schematics source
> > To: Bill M Jenkins <[email protected]>
> > Cc: [email protected]
> >
> > Two schematics....
> >
> >
> >
>
http://80.162.141.166/mods.dk/download.php?radio=kenwood&file=R-599S_Schemat
> ic.pdf
> >
> >
>
http://80.162.141.166/mods.dk/download.php?radio=kenwood&file=R-599A_Schemat
> ic.pdf
> >
> > from http://www.mods.dk/
> >
> > Rodney
> > VK2KTZ
> >
> >
> > --- Bill M Jenkins <[email protected]> wrote:
> > > Hi to all. Where can I find a manual or at least a schematic for the
> > > Kenwood R599? All help is very much appreciated.
> > > Bill
> > > W5ICS
> > >
> > > ________________________________________________________________
> > > Sign Up for Juno Platinum Internet Access Today
> > > Only $9.95 per month!
> > > Visit www.juno.com
> > > - - -
> > >
> > > Your moderator for this list is:
> > > Larry Wilson KE1HZ [email protected]
> > >
> > > _______________________________________________
> > > Kenwood mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/kenwood
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Tax Center - File online, calculators, forms, and more
> > http://tax.yahoo.com
> >
> >
> > --__--__--
> >
> > _______________________________________________
> > Kenwood mailing list
> > [email protected]
> > http://mailman.qth.net/mailman/listinfo/kenwood
> >
> >
> > End of Kenwood Digest
> >
> >
>
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood