[Kenwood] Info Needed on TS 430

Tue, 7 May 2002 00:08:16 -0700

 I thought it sounded like either an audio filter of some kind, or possibly
an audio preamp.
 But I'd trace where the wires went to and from.
 Difficult without a roadmap (schematic), but doable in some cases.
 One of these days I'll take a peek inside my TS140S and see what's lurking
inside. <G> ...
 Wayne.  <|:^)>
 [email protected]
 http://www.wayneleake.net

----- Original Message -----
From: "Jerry Isenhart -" <[email protected]>
To: <[email protected]>
Sent: Monday, May 06, 2002 9:55 PM
Subject: Re: [Kenwood] Info Needed on TS 430

> My Oh My ...
> So you're the one who has my old radio.
> That "bugger" was just that.... My wife was SO JEALOUS of the time I spent
> on my Ham Radio that
> she had that little "bug" wired in to my TS-430 so she could listen in
from
> the phone across the street.
> I found out when the neighbors started complaining too.
> Hope this helps.
>
>
> ----- Original Message -----
> From: "William J. Diamond" <[email protected]>
> To: <[email protected]>
> Sent: Monday, May 06, 2002 9:36 PM
> Subject: [Kenwood] Info Needed on TS 430
>
>
> Hello Folks,
>
> While attempting to remove an Inrad filter from my Kenwood TS 430 to put
it
> back to orig. performance I ran across another non Kenwood board.
>
> It is small PC board about 1.25" X 2" with 2 IC's, 1 what appears to be a
> Mosfet, 5 disk caps and a few resistors.  It was held toward the back of
the
> radio by bent over terminals, it has several "telephone type" wires hooked
> to the main circuit board.
>
> The only markings on it are, Out, IN and VCC.  Does anyone have any idea
> what this bugger is?
>
> Thanks,
>
> [email protected]
> http://pages.sbcglobal.net/wjdiamond/index.html
>    Please look at my Personal Web Page
>
>  William J. Diamond  ( Bill )
>   Rogers, Arkansas USA
>
> Ham Radio Operator WR�T
>         Flying The Flag
> Long Before It Was Popular
>
>
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood
>
>
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood