[Kenwood] MC-60 and MC-60A

Sat, 16 Mar 2002 21:52:00 +0100

I have a MC-60 with the up-down bar,  with an 8 pin connector and without
the amplifier in the base.

I think the difference is only the internal amplifier.

Regards.
José Luis  EA4YD.

----- Original Message -----
From: "Ron Goldstein" <[email protected]>
To: "Don" <[email protected]>; <[email protected]>
Sent: Saturday, March 16, 2002 5:39 PM
Subject: Re: [Kenwood] MC-60 and MC-60A

> At 11:16 PM 3/15/02 -0600, Don wrote:
> >Can someone tell Me the difference between The MC-60 And the MC-60A  ?
I
> >have seen them on E-Bay and I know the one I have Has MC-60 On it ,
but it
> >is a Amplified Mic did Kenwood , When they first started Making the
> >60A  Just use the same old Stamp on the older one ?
> >
> >                                                   Thanks Don KA9QJG
> =====================================================================
> Hi Don and all other Kenwood list subscribers,
>
>          This has always been a questionable item. I had an old Kenwood
> brochure that had both microphones in it with a description of both of
> them. I scanned it and put it up on the space that my ISP allows me for
> pics. To see what the actual difference is, just click on the link
below.
>
>
>                          http://home.computer.net/~rong/mc-60.jpg
>
>
>          The original MC-60 had a 4 pin connector, no amp, and no
up-down
> bar in the base. The MC-60A had an 8 pin connector, an amplifier in the
> base, and the up-down bar. They DID NOT change the base casting--only
cut
> out the hole for the up-down bar. Both bases only have MC-60 cast into
> them. This should clear everything up.
>
>
>                                          RON....KA2IIA
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood
>