[Kenwood] Questions on the TS-430

Sun, 23 Jun 2002 09:00:13 -0500

Duncan, Scott:

Stock filters, per the 430 manual are:  AM: YK88A 8.83  L71-0223-05; CW: YK88C
500hz 8.83 L71-0211-05, YK88CN 270hz 8.83  L71-0211-05; SSB YK88SN 8.83
L71-0220-05.  I don't know about replacing with other Kenwood filters.

ACC Connector Wiring  per the instruction manual:

                                 GND
                    pin 8 RL                    Pin 7 BA
 Pin 3 Transmit 12V                             Pin 1 BB
                                       Pin 6

Pin 5 WRC                                           Pin 4 BC

                                    Pin 2 BD

Its actually easier for me just to photocopy it and send it to your friend.

Tom, WW5L

Duncan Cameron wrote:

> Hello-
> I have a friend who is working on a TS-430. He asked to help with a couple
> of questions he has. What are the Pin Assignments for the 8 pin ACC
> connector on the back of the 430? What are the "stock" filters in the 430 in
> the 455, and 8.83 IF's? (for example the 455-what is the designation after
> the cf455? (K?). What YK88 filter is stock? (S?))
> Can the stock filters be directly replaced with wider filters from later
> model Kenwoods, like the ones in the TS930 or 870. (cf455K12 and YK88S2)
> Thanks very much for any answers, help, or suggestions you can offer!
> Regards,
> Scott
>
> _________________________________________________________________
> Chat with friends online, try MSN Messenger: http://messenger.msn.com
>
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood