[Kenwood] Radio Menu

28 Feb 2002 07:17:45 -0800

As far as I know, all the TS-450 and TS-850 and earlier models the baud rate is fixed at 4800 Baud.  So there is no menu setting. TS-570/870 and TS-2000 are set at 9600).
Normally if there is no communications between the Comport on the PC and the Rig, the send/receive lines 2&3 on the RS-232 are not moving up and down.  A handy device is a RS-232 Breaker box that has LED's to show the status of the line.  Here in the US this Breaker box is sold at Radio Shack for about $15.00.
You might check some of the information I have on my webpage also.

http://www.qsl.net/k0bx/

Joe K0BX

On Wed, 27 February 2002, "Alan Gilchrist" wrote:

> 
> Hi ....Is anyone aware of how to ( if at all possible ) access the menu in
> the TS450 where baud rate etc can be checked for use with a PC.
> 
> I cant get the PC + Interface to communicate correctly with the 450
> 
> I have been advised to check the radio settings
> 
> Thanks
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> Alan Gilchrist
> [email protected]
> 
> Amateur Radio Callsign  VK5BWG
> 
> Port Augusta Amateur Radio Club
> VK5RAE Mt Arden Repeater Web Site :-
> http://www.qsl.net/vk5rae
> 
> Port Augusta "Crossroads of Australia" Information :-
> http://www.portaugusta.sa.gov.au
> 
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 
> 
> 
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> 
> - - -
> 
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
> 
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood

[email protected]
http://www.qsl.net/k0bx
Find the best deals on the web at AltaVista Shopping!
http://www.shopping.altavista.com