[Kenwood] (no subject)

[R.J.Keller]

It may be something as simple as the processor being switched in and
controls set to min. Also, I have had dirty pots cause the same thing
(I.E. mike gain, processor in/out)
good luck, 73, Dick KF4NS

Message: 1
From: "n3drk" <jshea1@triad.rr.com>
To: <kenwood@mailman.qth.net>
Date: Wed, 30 Jan 2002 12:56:02 -0500
Subject: [Kenwood] no audio

My kenwood 930s has performed great but i have not used ssb for the
past
month or so. I have been on cw and when i tried ssb this morning i
have
maybe 20 watts output on peak. Switching to cw i have full power
output.
Now, on ssb the mic gain control along with the driver are at maximum
gain.Still very very low output. I switched mikes and the same
problem.

Anyone have any ideas on what is happening or what i could check?
Judging
from the past it is something simple i am overlooking.

thanks
john