[Kenwood] TS-850

[Mike Brown]

Yes, I've had this problem 3 times. I hope this last time was the last. T=
he
easy way to tell if that is your problem Keith is to put the rig in CW an=
d
put the rig in transmit with a continuous carrier. Then, if that is the
problem, you will see the output go back and forth. =0D
=0D
Happy Holidays to the list...=0D
=0D
Mike - K9MI=0D
=0D
=0D
 =0D
-------Original Message-------=0D
 =0D
From: k0bx@qsl.net=0D
Date: Friday, December 13, 2002 04:48:34=0D
To: Keith Poindexter; kenwood@mailman.qth.net=0D
Subject: Re: [Kenwood] TS-850=0D
 =0D
Keith, this sound like the "ALC" problem cause by the DC-DC convertor. =0D
The audio yo-yo's up and down.=0D
=0D
There is an article on the following website under ALC problem with the =0D
TS-850. Please read it and see if your is doing the same thing? The =0D
fix is also there.=0D
=0D
http://www.qsl.net/k0bx=0D
=0D
GL Joe K0BX=0D
=0D
=0D
Keith Poindexter wrote:=0D
> Hello Guys=0D
> I have a Kenwood TS-850 that has a tx audio problem.=0D
> When you key the mic, the radio changes into TX but the=0D
> tx audio hesitates. I can hear it in the monitor. Also if you =0D
> punch the audio during the tx the audio fails and then it =0D
> fades back in . Very Strange. Anyone out there had a similar=0D
> problem ??=0D
> Thanks for any assistance.=0D
> =0D
> Keith Poindexter=0D
> ko4sx@alltel.net=0D
> =0D
>=0D
=0D
- - -=0D
=0D
Your moderator for this list is:=0D
Larry Wilson KE1HZ kenwood-owner@mailman.qth.net=0D
=0D
_______________________________________________=0D
Kenwood mailing list=0D
Kenwood@mailman.qth.net=0D
http://mailman.qth.net/mailman/listinfo/kenwood=0D
=2E=20

--- StripMime Report -- processed MIME parts ---
multipart/related
  multipart/alternative
    text/plain (text body -- kept)
    text/html
  image/gif
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---