[Kenwood] TS-2000 and MCP Software problem

Sun, 1 Dec 2002 09:10:47 -0000

Sorry. I was referring to the ARCP program. For the MCP program, I have the
radio's data speed set the same, 19200 and the software set to match on the
correct com port. Clicking on Read All, causes it to attempt to read memory
from the radio. Seems to work fine for me. The radio beeps in
acknowledgement.
Steve
N4LQ

----- Original Message -----
From: "NZ8J" <[email protected]>
To: "Steve Ellington" <[email protected]>
Sent: Sunday, December 01, 2002 2:00 AM
Subject: Re: [Kenwood] TS-2000 and MCP Software problem

> Hi Steve,
> Thanks for the response.. I don't see any "con" to click on, I just go to
> the "radio" drop down menu and click on READ ALL, I get a "communications
> timout error". Are you talking about the free MCP program, or the
ARCP-2000
> program?
> Tim
> NZ8J
> ----- Original Message -----
> From: "Steve Ellington" <[email protected]>
> To: "NZ8J" <[email protected]>; <[email protected]>
> Sent: Sunday, December 01, 2002 3:51 AM
> Subject: Re: [Kenwood] TS-2000 and MCP Software problem
>
>
> > I set the 2000's menu #56 at 19200bps and the MCP software to match.
Click
> > on con in the program and it should take over.
> > Steve
> > N4LQ
> >
> > ----- Original Message -----
> > From: "NZ8J" <[email protected]>
> > To: <[email protected]>
> > Sent: Sunday, December 01, 2002 1:46 AM
> > Subject: [Kenwood] TS-2000 and MCP Software problem
> >
> >
> > >     I loaded the free MCP software from Kenwood and have the computer
> > > connected to the radio, but cannot seem to establish communications
with
> > the
> > > radio.  I have successfully used the same computer and cable to run a
> Ten
> > > Tec Jupiter, so I know the basic setup works. I have checked the ports
> and
> > > speed. Is there something that must be set in the radio menu to make
it
> > > work, I can't see anything obvious..
> > > Thanks
> > > Tim
> > > NZ8J
> > >
> > >
> > > - - -
> > >
> > > Your moderator for this list is:
> > > Larry Wilson KE1HZ [email protected]
> > >
> > > _______________________________________________
> > > Kenwood mailing list
> > > [email protected]
> > > http://mailman.qth.net/mailman/listinfo/kenwood
> > >
> >
> >
> >
>
>
>