[Kenwood] TS-520S 9 Pin Plug Wiring

Fri, 2 Aug 2002 20:17:32 -0400 (EDT)

On my 520S, there is a gap which keys the plug... it is toward the bottom
of the plug/socket.

If I am looking at the back of the radio, and I start with the pin to the
*right* of the gap as #1, and count counter-clockwise.... the last two
pins are shorted in my plug.

On my plug I can look through a hole in the back (non-pin side) and see
the solder bridge between the stub ends of pins #8 and #9.

Hope this helps.

On Fri, 2 Aug 2002, John Campbell wrote:

> I know this may be a dumb question, but the TS-520S I recently bought is
> in transit to me at this time without the 9 pin plug for the EXT VFO
> socket.  I do not have a manual for the 520S yet, and a new 9 pin plug
> just arrived today.  My question is: on shorting pins 8 and 9 together
> to allow the internal vfo to work, do I count the pins on the plug like
> I am looking at the female socket on the radio and count clockwise?
> I'm sure this is the way but just need assurance.  Thanks,

> John, K5ENA.
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment. Attachments are not allowed.
> Please post in Plain-Text only.---
> - - -
>
> Your moderator for this list is:
> Larry Wilson KE1HZ [email protected]
>
> _______________________________________________
> Kenwood mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/kenwood
>

-- 
John M. Trindle KG4RZH FM17pg
http://i.am/jtrindle
"Gerrold's Fundamental Truth:
  It's a good thing money can't buy happiness.
  We couldn't stand the commercials."