[K3PZN-List] Carroll Repeater site work completed

[Andy Leeds]

  I should also note that the grounding job looks very well done, we 
have all new polyphasers located at the building penetration, new 1/2 
hardline jumpers back to the duplexers and new 1/2 hardline jumpers from 
the duplexers all the way to the repeater RF input and output ports.

Andy

On 9/28/2010 17:55, Andy Leeds wrote:
>    The 114.8 PL is required for repeater access from 2300 - 0600 nightly
> and in the event of a band opening it could be manually enabled for a
> few hours if one of the control ops feels it is necessary to prevent
> interference. It is always transmitted by the repeater. So in general
> its a good idea to program your radios to have the tone, it won't ever
> hurt and it will help sometimes. We have no plans to require the tone
> full time.
>
> On the way home I noticed that the 6M and 70cm repeaters were on but the
> 2M was not. I went up to the site and tightened the power connector on
> the PA, problem solved. I also set the clock while I was up there and
> put the controller in normal day mode.
>
> Andy