[K3CAL] Experimenting with 9600-baud APRS

[N3AE]

Actually, I'd just like to have some Calvert ops get together on 1200 AX-25 packet for a net, either unprotected mode or multi-connect before we start playing with 9600.   Seems we spend too much energy aiming for a moon shot before we even have the ability to get into orbit.

Shawn
N3AE

----- Original Message -----
From: Eric Christensen via K3CAL <k3cal at mailman.qth.net>
To: Calvert Amateur Radio Association - K3CAL <k3cal at mailman.qth.net>
Cc: Eric Christensen <eric at christensenplace.us>
Sent: Fri, 20 May 2016 01:55:09 -0000 (UTC)
Subject: [K3CAL] Experimenting with 9600-baud APRS

I was talking with a friend back in NC about experimenting with 
9600-baud APRS.  There might be some benefits of using the higher baud 
rate but there are also some drawbacks that come to mind.

I was thinking about something along the lines of Bob's (WB4APR) 
Ultimate APRS digipeater[0].  We don't have enough hardware to add the 
144.990MHz receiver but I think I can pull enough stuff together to add 
a UHF frequency to the digipeater temporarily to experiment with.

Anyone interested?

73,
Eric WG3K

[0] http://www.aprs.org/digi-ultimate.html
______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html