[K3CAL] Experimenting with 9600-baud APRS

[N3AE]

Interested, but out of town for a bit. 

Shawn 

----- Original Message -----

From: "Eric Christensen via K3CAL" <k3cal at mailman.qth.net> 
To: "Calvert Amateur Radio Association - K3CAL" <k3cal at mailman.qth.net> 
Cc: "Eric Christensen" <eric at christensenplace.us> 
Sent: Thursday, May 19, 2016 9:55:09 PM 
Subject: [K3CAL] Experimenting with 9600-baud APRS 

I was talking with a friend back in NC about experimenting with 
9600-baud APRS. There might be some benefits of using the higher baud 
rate but there are also some drawbacks that come to mind. 

I was thinking about something along the lines of Bob's (WB4APR) 
Ultimate APRS digipeater[0]. We don't have enough hardware to add the 
144.990MHz receiver but I think I can pull enough stuff together to add 
a UHF frequency to the digipeater temporarily to experiment with. 

Anyone interested? 

73, 
Eric WG3K 

[0] http://www.aprs.org/digi-ultimate.html 
______________________________________________________________ 
K3CAL mailing list 
Home: http://mailman.qth.net/mailman/listinfo/k3cal 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:K3CAL at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20160520/e4299dde/attachment.html>