[K3CAL] Fwd: [YaesuSystemFusion] Digest Number 1503

[Jim Tetlow]

For those of you that have a wires x connected to your computer, you may find this interesting from one of the Yaesu Groups. 
Have a great day.

Sent from my iPad,
Best Regards, 73,
Jim Tetlow

Begin forwarded message:

> From: YaesuSystemFusion at yahoogroups.com
> Date: August 24, 2016 at 03:45:19 EDT
> To: YaesuSystemFusion at yahoogroups.com
> Subject: [YaesuSystemFusion] Digest Number 1503
> Reply-To: "No Reply"<notify-dg-YaesuSystemFusion at yahoogroups.com>
> 
>             Yaesu System Fusion Group            
> 1 Message              Digest #1503      
> 1 HRI-200 Wiresx Configuration for those that don't know by florida34953                  
> Message
> 1 HRI-200 Wiresx Configuration for those that don't know                        
> Tue Aug 23, 2016 9:28 am (PDT) . Posted by:      florida34953
> I have been having a blast with WiresX and all the new and old friends I have made while bouncing around and saying hello.
> If you use WiresX and you did not insert your own QSL image for others to see when they connect either to you, or your room, you should. The image can be anything that will look good in a 320x240 pixel BMP file. I can't believe how many WiresX systems I connect to and they have the default WiresX image showing.
> 
> 
> To see others QSL image, your wiresX software has to have the check box checked off, there is two places to check off QSL Exchange, one is in the first screen you see, and the next is in Round QSO room Settings. 
> Right below that is where you select the image to display to others.
> 
> 
> The easiest way to get that image to work is to first find the image that will look good in that small QSL window. Next, open it with Microsoft Paint, or some other program that will let you resize it to 320x240 pixels. If you use Paint, you want to uncheck Maintain Aspect Ratio, or you will get an image that will not fill the entire window, and it will look odd.
> 
> 
> Lastly, save it as a high resolution BMP file, then point your WiresX system at that picture in both places where your checked off QSL Exchange.
> 
> 
> You also should get your GPS coordinates and place them under Location Settings, that way you will get accurate information about the distance from your QTH, and the person you are connected with, or the room you are connecting with.
> 
> 
> One of the images will show upo when someone connects to your node, and other when they connect with your room. They can be different images if you want.
> 
> 
> Please don't bother to tell me that you already know this, it was not meant for you. It is meant to prompt others to more fully configure their WiresX system.
> 
> 
> 
> 
> If you connect with my node, you will see the image I took with a camera. It is made by Begali.
> 
> 
> Node number 18565 , or just look for KQ4BX.
> 
> 
> 73' Joe
> Reply to sender . Reply to group . Reply via Web Post . All Messages	(1) . Top ^
> VISIT YOUR GROUP New Members 12
> • Privacy • Unsubscribe • Terms of Use 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20160824/cdc5b9f6/attachment-0001.html>