[K3CAL] concrete drill

[David Weaver]

I have 3/8 bolts and 3/8 anchors
Dave


On August 15, 2015, at 11:44 AM, Richard Terlisner <rterlisner at gmail.com> wrote:

i found the 3/16" & 1/4" bits for some tapcons i used.  but they are both dead.  i might have a few more around that i know would fit a 3/8 or 1/2 chuck.  what diameter do you need should i come across them?


On Sat, Aug 15, 2015 at 7:51 AM, Richard Terlisner <rterlisner at gmail.com> wrote:

I'll check when I get home.  About an hour or so.

On Aug 15, 2015 6:22 AM, "David Weaver" <w3pqs at comcast.net> wrote:

3/8 or 1/2c huck

Dave



On August 14, 2015, at 8:44 PM, Richard Terlisner <rterlisner at gmail.com> wrote:


What size?  I msy have a few.  I'll have to check. 

On Aug 14, 2015 3:02 PM, "David Weaver" <W3PQS at comcast.net> wrote:

Hi

I am looking to see if someone has a concrete drill they can let me use on Tuesday the 18th

if you have one and I can borrow please let me know. Also if you have concrete drill bits I have some that fit a regular Chuck

Dave Weaver W3PQS


______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150815/708d427e/attachment.html>