[K3CAL] concrete drill

[Richard Terlisner]

i found the 3/16" & 1/4" bits for some tapcons i used.  but they are both
dead.  i might have a few more around that i know would fit a 3/8 or 1/2
chuck.  what diameter do you need should i come across them?

On Sat, Aug 15, 2015 at 7:51 AM, Richard Terlisner <rterlisner at gmail.com>
wrote:

> I'll check when I get home.  About an hour or so.
> On Aug 15, 2015 6:22 AM, "David Weaver" <w3pqs at comcast.net> wrote:
>
>> 3/8 or 1/2c huck
>>
>> Dave
>>
>>
>> On August 14, 2015, at 8:44 PM, Richard Terlisner <rterlisner at gmail.com>
>> wrote:
>>
>>
>> What size?  I msy have a few.  I'll have to check.
>> On Aug 14, 2015 3:02 PM, "David Weaver" <W3PQS at comcast.net> wrote:
>>
>>> *Hi*
>>>
>>> *I am looking to see if someone has a concrete drill they can let me use
>>> on Tuesday the 18th*
>>>
>>> *if you have one and I can borrow please let me know. Also if you have
>>> concrete drill bits I have some that fit a regular Chuck*
>>>
>>> *Dave Weaver W3PQS*
>>>
>>> ______________________________________________________________
>>> K3CAL mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:K3CAL at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>
>> ______________________________________________________________
>> K3CAL mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:K3CAL at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150815/fefb7518/attachment.html>