[Johnson] 120V Accessory Socket

[Lee via Johnson]

David,
 
You can easily make one up if you have an unneeded HC6/U crystal.   Just 
disassemble it, drill a hole for the wires, solder in the relay leads then  
reassemble it.  Glen Zook may still make these up as well.
 
I guess we'll never know why EF Johnson chose such a funky was of  
connecting the antenna relay.
 
73
Lee WB6SSW
 
 
In a message dated 1/8/2015 10:55:28 A.M. Pacific Standard Time,  
dhallam at knology.net writes:

URRG!  Does anyone have a positive, non-loosening, method to  make a 
connection to the 120V accessory socket (really a crystal holder)  on the 
back of a Johnson transmitter that doesn't involve replacing the  
socket?  If you have to replace the socket,  suggestions?

David
KW4DH

-- 
There are two possible  outcomes: if the result confirms the hypothesis, 
then you've made a  measurement.
If the result is contrary to the hypothesis, then you've made  a discovery.
Enrico  Fermi

______________________________________________________________
Johnson  mailing list
Home: http://mailman.qth.net/mailman/listinfo/johnson
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:Johnson at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html