[Johnson] Rear 120VAC Connector on Johnson Transmitter

[ewirtz]

On 5/2/2011 3:07 PM, WA5VGO wrote:
> Remove the crystal socket and replace it with two Johnson panel mount
> pin jacks. They fit the existing holes perfectly. Use two Johnson pin
> plugs to mate with the new jacks.
>
> Darrell, WA5VGO
>
>
> On 5/2/2011 10:58 AM, David C. Hallam wrote:
>> Has anyone have a foolproof method to make a secure connection of the
>> plug in the rear apron crystal socket outlet used to supply 120VAC to
>> the antenna relay?  I am using the very inelegant method of a piece of
>> duck tape.
>>
>> David
>> KW4DH
>>
> Hi,

I did exactly the same thing and it works great. In fact if you use 
banana jacks which fit equally as well you can use standard banana plugs 
which fit a little tighter.. I suppose you could even adjust the hole 
spacing and mount a dual banana jack. Of course that would make the 
purists among us upset.

73,

Ed, KØBKA
> ______________________________________________________________
> Johnson mailing list
> Home: http://mailman.qth.net/mailman/listinfo/johnson
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Johnson at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html