[Johnson] Invader 2000 Power Switching

Al Parker anchor at ec.rr.com
Mon Mar 29 09:48:56 EDT 2010


Hi guys,
    Thanks for the suggestions.  It's been a while since I was using the 
I-2000, was thinking there was one other switching reqmt, but guess not. 
One of these days I'll get into it and take care of things.
73,
Al, W8UT
New Bern, NC
www.boatanchors.org
www.hammalund.info

"there is nothing -absolutely nothing- half as much worth doing as
 simply messing about in boats."
   Ratty, to Mole


----- Original Message ----- 
From: "Singley, Rodger" <rbsingl at ilstu.edu>
To: "Al Parker" <anchor at ec.rr.com>; <dhallam at rapidsys.com>; "Johnson List" 
<Johnson at mailman.qth.net>
Sent: Sunday, March 28, 2010 8:35 PM
Subject: RE: [Johnson] Invader 2000 Power Switching



The simplest way is just a manual coax switch to select either the low or 
high output to go to your T/R relay.  A little more involved but very 
convenient is to use a 115 volt relay with the coil fed from the switched AC 
via the PA filament switch.  You could also mount this relay internally so 
you just have one external coax connection to use on the back of the Invader 
2000.

With the relay, tie the common to the transmitter input of your T/R relay or 
switch.  Then the normally closed contact goes to the exciter RF output and 
the normally open goes to the high power output and the choice will be made 
automatically when you switch the amplifier filament switch.

Rodger WQ9E

-----Original Message-----
From: johnson-bounces at mailman.qth.net on behalf of Al Parker
Sent: Sun 3/28/2010 4:42 PM
To: dhallam at rapidsys.com; Johnson List
Subject: Re: [Johnson] Invader 2000 Power Switching

Hi David,
    I'd use my Inv. 2000 more often if there was an easy way, I'm hoping for
an answer, too.
73,
Al, W8UT

----- Original Message -----
From: "David C. Hallam" <dhallam at rapidsys.com>
To: "Johnson List" <Johnson at mailman.qth.net>
Sent: Sunday, March 28, 2010 2:22 PM
Subject: [Johnson] Invader 2000 Power Switching


What methods has anyone used for a convenient method of switching
between the low and high power antenna connectors on the Invader 2000?

David
KW4DH
--
"One of the evils of democracy is, that you have to put up with the man
you elect whether you want him or not."  Will Rogers

______________________________________________________________
Johnson mailing list
Home: http://mailman.qth.net/mailman/listinfo/johnson
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Johnson at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Johnson mailing list
Home: http://mailman.qth.net/mailman/listinfo/johnson
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Johnson at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



More information about the Johnson mailing list