[Johnson] Bolts

[Paul Carreiro, N6EV]

At 08:47 AM 12/4/2009, Dave K6XYZ wrote:
><snip> ...like almost all of
>these transmitters....it is missing the 4 long cabinet bolts.
>What are we doing these days for these bolts or do we have to make them?
>Same deal on the Ranger 1 that I have....I need the long bolts for it too.

Suitable replacement bolts are available cheap from McMaster 
Carr.  http://www.mcmaster.com/

Valiant:  Part number 99117A610
              Description: 14" Zinc-plated pan-head 10-24 thread
              $10.22 for a pack of 5

Ranger: Part number 99117A590
              Description 12" Zinc-plated pan-head 10-24 thread.
              $9.53 for a pack of 5
              Ranger requires about 11.5" rod length, so you will 
need to cut approximately 1/2" off

Note: These are combo standard / phillips pan-head bolts.  So they 
won't work for the purists out there looking for a standard only head 
replacement like the original.  I use these on my Valiant and 
Rangers.  Pack of 5 allows you to loose one (Valiant) or two (Ranger) 
and still be in the game!  :)

73
Paul  N6EV
http://www.N6EV.com/


-------------- next part --------------

No virus found in this outgoing message.
Checked by AVG - www.avg.com 
Version: 9.0.709 / Virus Database: 270.14.94/2545 - Release Date: 12/04/09 11:34:00