[Johnson] plug for Ranger/Valiant relay socket?

[David C. Hallam]

Or if you don't want to make one like this, Glenn Zook sells them ready 
made.

David
KC2JD/4

K1LKY wrote:
>  >Anyone have a plug for the Ranger/Valiant relay socket they'd like to  
>> part with? Or, have an idea for making one?
> 
> You likely mean the two pin ceramic socket on the back skirt - 
> 
> Use a defunct or useless HC-6 crystal.  Unsolder the thing with a moderate to big solder iron, make a hole in the flat top for the wire, junk the crystal itself and solder the wires to the pins.  Then put silicone RTV if you like inside the thing to hold the wire, and re-solder it shut.  Epoxy works well, too.
> 
> Roy
> 
> ______________________________________________________________
> Johnson mailing list
> Home: http://mailman.qth.net/mailman/listinfo/johnson
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Johnson at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
>