[Johnson] Johnson VFO parts WTB

[Rick Brashear]

Hi Bruce,

I may have a few of those around here, I'll take a look.  I started
soldering a short piece of copper wire in the slots of the capacitors and
let the insulators straddle that.  It was always easier then trying the
balancing act of keeping all those little clips in place while putting to
top back on the VFO.

Rick/K5IAR



-----Original Message-----
From: johnson-bounces at mailman.qth.net
[mailto:johnson-bounces at mailman.qth.net] On Behalf Of hudlerb1 at netzero.com
Sent: Friday, November 16, 2007 5:53 PM
To: johnson at mailman.qth.net
Subject: [Johnson] Johnson VFO parts WTB


Hello fellow Boat Anchors,

I was just working on the Valiant, and need two of those little spring clip
things that go on the VFO calibrating capacitors inside the box on the
insulated screw things through the top.
The rig came with two missing, so I have to adjust one band, then take it
apart to move the springy things, then adjust the next...what a pain.  

Gladly pay for what you ask....any spare pieces out there to be had?

TIA 73's Bruce WA3MKC

Johnson mailing list
Home: http://mailman.qth.net/mailman/listinfo/johnson
Help: http://mailman.qth.net/mmfaq.html
Post: mailto:Johnson at mailman.qth.net