[Johnson] Re: Johnson Digest, Vol 24, Issue 6

[Chuck Hurley]

Steve,

Thanks,

Chuck


----- Original Message ----- 
From: <johnson-request at mailman.qth.net>
To: <johnson at mailman.qth.net>
Sent: Sunday, January 08, 2006 4:00 AM
Subject: Johnson Digest, Vol 24, Issue 6


> Send Johnson mailing list submissions to
> johnson at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/johnson
> or, via email, send a message with subject or body 'help' to
> johnson-request at mailman.qth.net
>
> You can reach the person managing the list at
> johnson-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Johnson digest..."
>
>
> Today's Topics:
>
>   1. FS: Knobs, Incl. Collins and Hallicrafters (Brian Carling)
>   2. FS: Johnson Tube Sockets (Brian Carling)
>   3. Re: Ranger keyer (SBJohnston at aol.com)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 07 Jan 2006 09:18:35 -0500
> From: "Brian Carling" <bcarling at cfl.rr.com>
> Subject: [Johnson] FS: Knobs, Incl. Collins and Hallicrafters
> To: HamRadioTradeingPost at yahoogroups.com, HamStuff at yahoogroups.com,
> hamradiohomebrew at yahoogroups.com, johnson at mailman.qth.net
> Message-ID: <43BF876B.7312.2236AA at localhost>
> Content-Type: text/plain; charset=US-ASCII
>
> FOR SALE:
> Two lots of antique radio knobs...
>
> Knob Collection #1 - Collins etc.
> Unsure which models of radios these five knobs go
> to.
> They are all in good shape and come with the set
> screws.
> Sizes are: 3",  2-5/8",  2-3/8",  1-7/8" and 1-
> 1/2" diameter.
> Available for $29.00 plus shipping
>
> Knob Collection #2 - Hallicrafters etc.
> Looks like some of these three knobs and two dial
> skirts
> are for SX101 etc.
> All in good shape with set screws.
> Sizes are all 2-11/16" diameter.
> Available for $19.00 plus shipping.
>
> Pictures and details at:
> http://www.af4k.com/miscpart.htm
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 07 Jan 2006 09:45:00 -0500
> From: "Brian Carling" <bcarling at cfl.rr.com>
> Subject: [Johnson] FS: Johnson Tube Sockets
> To: hamradiohomebrew at yahoogroups.com, heathkit at yahoogroups.com,
> heathkit at cyberventure.com, johnson at mailman.qth.net,
> MOPAGROUP at yahoogroups.com
> Message-ID: <43BF8D9C.30227.3A65E3 at localhost>
> Content-Type: text/plain; charset=US-ASCII
>
> FOR SALE:
>
> E.F. Johnson 4-pin Tube Sockets
> Ceramic and silver type sockets - overall 3.25"
> dia.
> Made for tubes about the size of 4PR600 etc.
> Pin diameters look alike.
> Will sell for $8 each, or all SIX for $32.00
> plus shipping.
>
>
> ------------------------------
>
> Message: 3
> Date: Sat, 7 Jan 2006 16:42:53 EST
> From: SBJohnston at aol.com
> Subject: Re: [Johnson] Ranger keyer
> To: johnson at mailman.qth.net
> Message-ID: <221.5e76adb.30f18fdd at aol.com>
> Content-Type: text/plain; charset="US-ASCII"
>
>
> Make sure that the keyer circuit is getting a good ground return.  Mine
> relied upon the mechanical connection thru the standoffs for the ground, 
> and it was
> not a good enough connection for reliable operation.  I ended up running 
> an
> additional wire up to the keyer chassis ground point (low filament 
> terminal I
> believe) from a ground lug under the main chassis.
>
> Steve  WD8DAS
>
> sbjohnston at aol.com
>
>
>
> ------------------------------
>
> Johnson mailing list
> Home: http://mailman.qth.net/mailman/listinfo/johnson
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Johnson at mailman.qth.net
>
>
> End of Johnson Digest, Vol 24, Issue 6
> **************************************
>