[Johnson] Johnson Viking Valiant

[Glen Zook]

There is an HC6/U type ceramic socket on the back of
the chassis.  This provides 120 VAC that is switched
when the transmitter is placed in the transmit mode. 
You use this voltage to provide the current to
activate a relay with a 120 VAC coil.  The contacts on
the relay then key the amplifier and usually switch
the antenna between the output from the linear
amplifier when in transmit to the receiver when the
transmitter is not activated.

If you need the connector that goes between the HC6/U
socket and the relay see the Zcomco website the URL of
which is listed at the end of this message.

Glen, K9STH


--- ted <ted1970 at sbcglobal.net> wrote:

Where can I tap off to key current day amps?Not sure
where I can hook up to,







Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco


	
		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com