[Johnson] Re: Johnson Digest, HAMMARLUND HQ-170AX-VHF

C R E Strachan c6aniportnelson at batelnet.bs
Mon Apr 25 10:27:18 EDT 2005 

WANTED: FULLY FUNCTIONAL AND CORROSION FREE HAMMARLUND HQ-170AX-VHF WITH 
MATCHING SPEAKER AND MANUAL; HQ-170A-VHF WOULD BE CONSIDERED.PLEASE PROVIDE 
FULL DETAILS OF YOUR OFFERING INCLUDING COST PRICE, COST TO SHIP TO A 77006 
ZIP TO RIC AT C6ANI at ARRL.NET ; MY THANKS.
Old Cold Stonecrab
----- Original Message ----- 
From: <johnson-request at mailman.qth.net>
To: <johnson at mailman.qth.net>
Sent: Monday, April 25, 2005 4:00 AM
Subject: Johnson Digest, Vol 15, Issue 20


> Send Johnson mailing list submissions to
> johnson at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/johnson
> or, via email, send a message with subject or body 'help' to
> johnson-request at mailman.qth.net
>
> You can reach the person managing the list at
> johnson-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Johnson digest..."
>
>
> Today's Topics:
>
>   1. Valiant Face Bezel (Chuck Hurley)
>   2. Re: Valiant Face Bezel (C Eus)
>   3. VALIANT VFO (radio)
>   4. RE: VALIANT VFO (Jerry K)
>   5. Re: VALIANT VFO (Cecil Acuff)
>   6. Re: VALIANT VFO (Dale Smith)
>   7. Re: VALIANT VFO (Kenneth D. Grimm, K4XL)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 24 Apr 2005 09:59:38 -0400
> From: "Chuck Hurley" <scorebrd at verizon.net>
> Subject: [Johnson] Valiant Face Bezel
> To: <johnson at mailman.qth.net>
> Message-ID: <001601c548d5$dee6f8c0$6901a8c0 at Chuck>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Looking for a Valiant VFO bezel and platic dial in good condition.
>
> Chuck - K1TLI
>
> ------------------------------
>
> Message: 2
> Date: Sun, 24 Apr 2005 10:08:43 -0700 (PDT)
> From: C Eus <catman351 at yahoo.com>
> Subject: Re: [Johnson] Valiant Face Bezel
> To: Chuck Hurley <scorebrd at verizon.net>, johnson at mailman.qth.net
> Message-ID: <20050424170843.39916.qmail at web53903.mail.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
>
> If you have the old bezel, send it off to Dee Alquist
> to have it redone (complete with new rubber). As to
> the dial, look at the back of the latest ER in the ads
> for Bruce Kryder. He produces new reproduction plastic
> dials for the Valiant/Ranger/Navigator family.
>
> Cal, N6KYR/8
> --- Chuck Hurley <scorebrd at verizon.net> wrote:
>> Looking for a Valiant VFO bezel and platic dial in
>> good condition.
>>
>> Chuck - K1TLI
>> Johnson mailing list
>> Home:
>> http://mailman.qth.net/mailman/listinfo/johnson
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:Johnson at mailman.qth.net
>>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
>
> ------------------------------
>
> Message: 3
> Date: Sun, 24 Apr 2005 16:57:44 -0500
> From: "radio" <radio at inwave1.com>
> Subject: [Johnson] VALIANT VFO
> To: <johnson at mailman.qth.net>
> Message-ID: <002401c54918$a667f240$3908af0c at pavilion>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Greetings,
> I am trying remove the VFO cover on my Valiant so I can replace R3.  I 
> have the cover loose and can raise it about a 1/4", but it is not free 
> yet.  I did this once on a Ranger many years ago and I remember it was a 
> bear.  My right angle screwdriver is to big to remove the last two lid 
> screws between the front panel and the VFO cover, but I'm not so sure that 
> is going to let me see what's not letting me lift the cover.  I need to 
> get this down because I have a Ranger to do too.
> Thanks,
> Paul W9PJ
>
> ------------------------------
>
> Message: 4
> Date: Sun, 24 Apr 2005 17:39:52 -0500
> From: Jerry K <w5kp at direcway.com>
> Subject: RE: [Johnson] VALIANT VFO
> To: radio <radio at inwave1.com>, johnson at mailman.qth.net
> Message-ID: <ALEFLHCFEGDJDDBMADMBEEENDDAA.w5kp at direcway.com>
> Content-Type: text/plain; charset=iso-8859-1
>
> You're not going to want to hear this, Paul, but you don't have to remove
> the entire cover to replace R3. Looking at it from the front, pull the 
> cover
> on your left. It comes off fairly easily. There's R3, staring at you. Not
> roomy in there, but not all that hard to do.
> Jerry W5KP
>
> -----Original Message-----
> From: johnson-bounces at mailman.qth.net
> [mailto:johnson-bounces at mailman.qth.net]On Behalf Of radio
> Sent: Sunday, April 24, 2005 3:58 PM
> To: johnson at mailman.qth.net
> Subject: [Johnson] VALIANT VFO
>
>
> Greetings,
> I am trying remove the VFO cover on my Valiant so I can replace R3.  I 
> have
> the cover loose and can raise it about a 1/4", but it is not free yet.  I
> did this once on a Ranger many years ago and I remember it was a bear.  My
> right angle screwdriver is to big to remove the last two lid screws 
> between
> the front panel and the VFO cover, but I'm not so sure that is going to 
> let
> me see what's not letting me lift the cover.  I need to get this down
> because I have a Ranger to do too.
> Thanks,
> Paul W9PJ
> Johnson mailing list
> Home: http://mailman.qth.net/mailman/listinfo/johnson
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Johnson at mailman.qth.net
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Sun, 24 Apr 2005 18:11:40 -0500
> From: "Cecil Acuff" <chacuff at cableone.net>
> Subject: Re: [Johnson] VALIANT VFO
> To: "Jerry K" <w5kp at direcway.com>, "radio" <radio at inwave1.com>,
> <johnson at mailman.qth.net>
> Message-ID: <003201c54922$f93430b0$6501a8c0 at acuff1>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
> I take it the Ranger is a little different.  I need to check mine and
> probably replace it.  I pulled the top cover and looked around.  It looks
> like maybe the Ranger has to come all apart.
>
> Suggestions are welcome as I don't have a manual yet...
>
> Cecil...
> ----- Original Message ----- 
> From: "Jerry K" <w5kp at direcway.com>
> To: "radio" <radio at inwave1.com>; <johnson at mailman.qth.net>
> Sent: Sunday, April 24, 2005 5:39 PM
> Subject: RE: [Johnson] VALIANT VFO
>
>
>> You're not going to want to hear this, Paul, but you don't have to remove
>> the entire cover to replace R3. Looking at it from the front, pull the
>> cover
>> on your left. It comes off fairly easily. There's R3, staring at you. Not
>> roomy in there, but not all that hard to do.
>> Jerry W5KP
>>
>> -----Original Message-----
>> From: johnson-bounces at mailman.qth.net
>> [mailto:johnson-bounces at mailman.qth.net]On Behalf Of radio
>> Sent: Sunday, April 24, 2005 3:58 PM
>> To: johnson at mailman.qth.net
>> Subject: [Johnson] VALIANT VFO
>>
>>
>> Greetings,
>> I am trying remove the VFO cover on my Valiant so I can replace R3.  I
>> have
>> the cover loose and can raise it about a 1/4", but it is not free yet.  I
>> did this once on a Ranger many years ago and I remember it was a bear. 
>> My
>> right angle screwdriver is to big to remove the last two lid screws
>> between
>> the front panel and the VFO cover, but I'm not so sure that is going to
>> let
>> me see what's not letting me lift the cover.  I need to get this down
>> because I have a Ranger to do too.
>> Thanks,
>> Paul W9PJ
>> Johnson mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/johnson
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:Johnson at mailman.qth.net
>>
>>
>> Johnson mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/johnson
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:Johnson at mailman.qth.net
>>
>
>
>
>
> ------------------------------
>
> Message: 6
> Date: Sun, 24 Apr 2005 19:30:29 -0400
> From: "Dale Smith" <newday at metrocast.net>
> Subject: Re: [Johnson] VALIANT VFO
> To: "Cecil Acuff" <chacuff at cableone.net>, "Jerry K"
> <w5kp at direcway.com>, "radio" <radio at inwave1.com>,
> <johnson at mailman.qth.net>
> Message-ID: <01c201c54925$9a798540$6401a8c0 at newday>
> Content-Type: text/plain; charset="iso-8859-1"
>
> They are both the same,just take left cover off looking from the front. If
> you look close at the bottom of the left panel you will see 2
> threaded lugs that extend under the chassis,there are 2 nuts under there 
> you
> have to take off.
> 73/dale/ka5who
> ----- Original Message ----- 
> From: "Cecil Acuff" <chacuff at cableone.net>
> To: "Jerry K" <w5kp at direcway.com>; "radio" <radio at inwave1.com>;
> <johnson at mailman.qth.net>
> Sent: Sunday, April 24, 2005 7:11 PM
> Subject: Re: [Johnson] VALIANT VFO
>
>
>> I take it the Ranger is a little different.  I need to check mine and
>> probably replace it.  I pulled the top cover and looked around.  It looks
>> like maybe the Ranger has to come all apart.
>>
>> Suggestions are welcome as I don't have a manual yet...
>>
>> Cecil...
>> ----- Original Message ----- 
>> From: "Jerry K" <w5kp at direcway.com>
>> To: "radio" <radio at inwave1.com>; <johnson at mailman.qth.net>
>> Sent: Sunday, April 24, 2005 5:39 PM
>> Subject: RE: [Johnson] VALIANT VFO
>>
>>
>> > You're not going to want to hear this, Paul, but you don't have to
> remove
>> > the entire cover to replace R3. Looking at it from the front, pull the
>> > cover
>> > on your left. It comes off fairly easily. There's R3, staring at you.
> Not
>> > roomy in there, but not all that hard to do.
>> > Jerry W5KP
>> >
>> > -----Original Message-----
>> > From: johnson-bounces at mailman.qth.net
>> > [mailto:johnson-bounces at mailman.qth.net]On Behalf Of radio
>> > Sent: Sunday, April 24, 2005 3:58 PM
>> > To: johnson at mailman.qth.net
>> > Subject: [Johnson] VALIANT VFO
>> >
>> >
>> > Greetings,
>> > I am trying remove the VFO cover on my Valiant so I can replace R3.  I
>> > have
>> > the cover loose and can raise it about a 1/4", but it is not free yet.
> I
>> > did this once on a Ranger many years ago and I remember it was a bear.
> My
>> > right angle screwdriver is to big to remove the last two lid screws
>> > between
>> > the front panel and the VFO cover, but I'm not so sure that is going to
>> > let
>> > me see what's not letting me lift the cover.  I need to get this down
>> > because I have a Ranger to do too.
>> > Thanks,
>> > Paul W9PJ
>> > Johnson mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/johnson
>> > Help: http://mailman.qth.net/mmfaq.html
>> > Post: mailto:Johnson at mailman.qth.net
>> >
>> >
>> > Johnson mailing list
>> > Home: http://mailman.qth.net/mailman/listinfo/johnson
>> > Help: http://mailman.qth.net/mmfaq.html
>> > Post: mailto:Johnson at mailman.qth.net
>> >
>>
>>
>> Johnson mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/johnson
>> Help: http://mailman.qth.net/mmfaq.html
>> Post: mailto:Johnson at mailman.qth.net
>>
>>
>
>
>
> ------------------------------
>
> Message: 7
> Date: Sun, 24 Apr 2005 20:27:55 -0400
> From: "Kenneth D. Grimm, K4XL" <kgrimm at adelphia.net>
> Subject: Re: [Johnson] VALIANT VFO
> To: Cecil Acuff <chacuff at cableone.net>
> Cc: johnson at mailman.qth.net
> Message-ID: <426C398B.8040702 at adelphia.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> Cecil Acuff wrote:
>> I take it the Ranger is a little different.  I need to check mine and
>> probably replace it.  I pulled the top cover and looked around.  It
>> looks like maybe the Ranger has to come all apart.
>>
>> Suggestions are welcome as I don't have a manual yet...
>>
>> Cecil...
> Please feel free to download the Valiant manual from BAMA.  The regular
> operation manual is there, along with the construction manual and a
> service bulletin on the Valiant.
>
> 73,
>
> -- 
>
> Ken K4XL
> k4xl at arrl.net
>
> *** BoatAnchor Manual Archive ***
> On the web at http://bama.sbc.edu and http://bama.edebris.com
> FTP site info: bama.sbc.edu login: anonymous p/w: youremailadr
>
>
>
> ------------------------------
>
> Johnson mailing list
> Home: http://mailman.qth.net/mailman/listinfo/johnson
> Help: http://mailman.qth.net/mmfaq.html
> Post: mailto:Johnson at mailman.qth.net
>
>
> End of Johnson Digest, Vol 15, Issue 20
> ***************************************
>

More information about the Johnson mailing list