[Johnson] Oops, The Rest of the Message didn't Make it

[Freeberg, Scott (STP)]

On the Relay sockets.  Those things drive me nuts as I haven't come up =
with a good way to make them really safe.  I've done the HC-6 crystal =
case thing with concerns.  I'm currently using 14 gauge house wire, =
stripped back just enough to be fully inserted into the socket, then =
heat shrink tubing over the solder connection to the small wire going to =
the antenna relay. With the wires fully inserted, there is minimal =
exposed wire.  The wires are friction retained and aren't falling out. =
It it safe?  No way.  Its fairly safe as long as the wires stay =
inserted.  If I yank on some other wire and this connection pulls out, =
then I have a big problem.  So I have to be pretty careful here.
73, Scott WA9WFA
http://www.qsl.net/wa9wfa