[Johnson] learning loads

Gary Schafer [email protected]
Tue, 17 Feb 2004 10:31:27 -0500


Ed,

I will give you $20.00 for the PRM-10. You can double your money. :>)

73
Gary  K4FMX

Edward Zeranski wrote:
> 
> KENNETH A CRIPS wrote:
>     I have been looking at Dip meters.  Are there any brands to ovoid, and what
> price range is fair for these things. I would prefer a one with vacuum tubes
> because they are so much easier the repair.
> Ken
> 
>     There are several brands like Millen, Measurements Corp, B&W, EICO,
> HeathKit etc. that show up at swapmeets. You can't go wrong with a Millen and
> they are pretty common especially the 90651. Mine was $15 at a swapmeet. I also
> have a 90662A that is similar but a bit more advanced and cost $50. Millen is
> the picture that jumps up for me when somebody says "Grid Dipper". Check out
> the Millen webpage for info and pictures:  http://www.qsl.net/jms/
> 
>     I got three, yep 3, Measurements model 59s in a box for $5 at the Santee
> swapmeet. One is now complete, one is missing the coils, and one is a parter.
> The 59 is a great GDO but a bit bulkier than the Millens so sometimes goes for
> cheap.
> 
>     PRM-10. This one is military, built like a tank, and a good set, $10 at the
> TRW swapmeet.
> 
>     The others here ate B&W, EICO, and Heathkit and they work but the ones
> above are the 'real' ones to look for.
> 
> EdZ
> 
> 
> _______________________________________________
> Johnson mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/johnson
>