[JMS] Millen grid dipper question

[W1GOR]

If my memory is correct, the 3-pin arrangement is used with a set of
low-frequency coils.  I recall that Millen had offered a set of LF coils
when the 90651 GDO was a hot item on every ham's Christmas list...  I'm not
absolutely sure that the LF coils had some sort of shield or a tap that
required a ground connection.

Go to: http://bama.edebris.com/manuals/millen/90651/  for a group of files
that may have the information that you seek...

73, Larry - W1GOR


----- Original Message ----- 
From: "Bob Roehrig" <broehrig at aurora.edu>
To: "glowbugs" <glowbugs at piobaire.mines.uidaho.edu>
Sent: Wednesday, December 15, 2004 7:30 PM
Subject: [JMS] Millen grid dipper question


>
> Just acquired a Millen 90651 grid dipper. The coils have 2 pins but there
> are 3 jacks on the dipper. The 3rd jack connects to the shield (ground).
> I am wondering what applications/accessories might have used all 3 pins.
> Also, is there an on-line manual/schematic available?
>
>                              Bob Roehrig
>                    Aurora University    Telecom dept.
>                    broehrig at aurora.edu    73 de K9EUI
>                    630-844-4898      fax 630-844-4222
>                    "Nostalgia is a thing of the past"
> ______________________________________________________________
> James_Millen_Society mailing list
> Home: http://mailman.qth.net/mailman/listinfo/james_millen_society
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:James_Millen_Society at mailman.qth.net