[ICOM] icom 706 MK2

[Rick Robinson]

Polish your fuses with scotch rite or steel wool and what you can of the
fuse holder.

On Wed, Apr 10, 2024 at 6:47 PM Adrian <vk4tux at gmail.com> wrote:

> Brian, When you say you 'ruled that out', has you metered the voltage at
> rig input under TX load at pwr setting 7 (FT8 is a good load test),
>
> prior to cutout, using a multimeter that has a min/max hold record, so
> you can see the stored minimum voltage during the cutout ?
>
>
> 73
>
>
> vk4tux
>
> On 11/4/24 08:34, Brian Gaskamp wrote:
> > I’ve been reading and thought maybe it was power supply issues but i’ve
> ruled that out.
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html