[ICOM] IC-7610 VOX through ACC

[r norris]

I believe the VOX circuit is only through the front mic connector.

A friend had to do some dance to key a Pro-1 for data.

Maybe rectify the incoming audio to a transistor, switching the PTT.

> On Mar 17, 2020, at 05:05, Martin Sole <hs0zed at gmail.com> wrote:
> 
> Hi,
> 
> Hopefully someone here can point me in the right direction.
> 
> I am helping a friend configure a couple of IC-7610's. As a part of that we wish to feed audio into the remote ACC1 connectors, in fact from a microham DXP. As it is set now I can see the receive audio from the 7610 through the DXP and to the PC, no problem. On transmit I have audio from the PC through the DXP and into the radio. If I press the transmit button on the front panel I have transmit audio and DATA OFF MOD is set to MIC,ACC but VOX does not seem to work. VOX works fine with a microphonebut no amount of audio into the ACC port seems to trigger the VOX. What have  I not set right?
> 
> Thanks
> Martin, HS0ZED
> 
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html