[ICOM] IC-706 to hf amplfier

[w5jmw at towerfarm.net]

oon the 13 pin plug Hsend is hf..160-6,Vsend is vhf 144-450...73 john








On 2019-11-12 18:50, Fern Rivard wrote:
> I finally dug my IC-706 M II G out of the box and would like to hook
> it up to my Alpha 9500 auto tune hf amplifier.
> I have the OPC-599 cable and a correct 7 pin male connector for ACC2
> interfacing.
> However checking in the manual page 6, it is not clear as to which pin
> I should use, pin 3 which is Hsend or pin 6 which is V send! Also, is
> it safe to hook it up directly without an interface relay?
> Any help would be greatly appreciated.
> 73 from Fern  VE7GZ
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html