[ICOM] Icom 706 Mkll G ssb distortion on transmit

[Bruce]

Is output and ALC ok in RTTY mode?
>From your description sounds like a bad final(s) or driver, check the bias voltage on finals and driver in SSB with mic
gain set to zero.

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On Behalf Of Dave S via Icom
Sent: Thursday, July 05, 2018 5:05 AM
To: icom at mailman.qth.net
Subject: [ICOM] Icom 706 Mkll G ssb distortion on transmit

Hello All,     I have a 706 Mk ll G that has distortion on SSB transmit and low alc.tried several different Icom mic's but still has distortion on SSB output even when the mic gain is on 2. Has anyone had this problem ? any suggestions other than send it back to Icom, On SS here, funds limited, I sure could use some help here, thank you, 73.                                                       Dave = kc8pcl at yahoo.com
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To support QSL/QTH.net: http://www.qsl.net/donate.html