[ICOM] ic7300 ATU

[KK2DOG in NY]

Make sure you have the external tuner in the bypass setting then try the internal tuner. I have to shut-off my external auto-tuner when I want to use the tuner on my 756PRO.

Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: icom-bounces at mailman.qth.net <icom-bounces at mailman.qth.net> on behalf of Alan <zl3kr.alan at gmail.com>
Sent: Sunday, September 24, 2017 5:54:44 PM
To: Icom
Subject: [ICOM] ic7300 ATU

I have a new IC7300 and when using the antenna tuner I do not seem

to be able to get my SWR to lower than 1.8 to 1 and need to use an
external tuner

to get it to 1 to 1, is this normal?? I used to have an IC761 and auto
atu on that would

tune any wire on any band to 1 to 1, so was expecting the same

Alan ZL3KR


----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html