[ICOM] IC7000 No Transmit on HF Bands

[Bruce]

Oh and looks like the PA went through a circuit change since Icom came out
with an addendum around 2010 to the service manual. 

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Dave Rossbach
Sent: Thursday, March 09, 2017 9:02 AM
To: icom at mailman.qth.net
Subject: Re: [ICOM] IC7000 No Transmit on HF Bands

Bob, thank you for contacting me back. I checked the fuse and it was 
still good. The contacts were a bit tarnished, so I cleaned them up and 
tried again with no success.

I went ahead and ensured the power cable fuses were good and clean as well.

Dave




On 3/8/17 6:38 PM, Robert DiPippo wrote:
> Check the fuse behind the removable front panel
>
> Bob
>
>
> On 03/08/2017 06:29 PM, Dave Rossbach wrote:
>> Hello.. I was hoping the list might be able to help me out here.  I have
>> an IC7000 that stopped transmitting on all the HF bands. It still
>> transmits on VHF and I can hit the local repeaters, but nothing on HF.
>>
>> After a little research, it seems the final drive (Q504) might be out
>> of it?
>>
>> Has anyone else experienced this problem with the IC7000 and if so what
>> was wrong with it? If it was the final drive, did you have ICOM fix it?
>>
>> Thanks in advance!
>> Dave
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html