[ICOM] re recorder on IC-7300

[Fern Rivard]

Many thanks Larry for your input. It's unfortunate that Icom messed up on 
that rebroadcast feature. Possibly if enough folks complain to Icom about 
this, they may be able to correct this.
I can make use of this feature with my Elecraft K3 which is nice to have.
73 from Fern  VE7GZ


-----Original Message----- 
From: Larry Dighera
Sent: Tuesday, February 14, 2017 6:18 AM
To: ICOM Reflector
Subject: Re: [ICOM] re recorder on IC-7300


Retransmission isn't supported by the Icom IC-7300 natively, but there is a
workaround.  It's a matter of putting the SD card in your computer, and
renaming the recorded audio file to one of those used for the voice memory
function, and then, with the SD card back in the 7300, transmitting that 
voice
memory.

Because of the added distortion/noise induced into the audio by the return 
trip
through the "ether" a second time, I could never understand why folks would
want to do that.  I prefer to send the audio file via e-mail.


On Mon, 13 Feb 2017 20:50:36 -0700, "Fern Rivard" <crc at cyberlink.ca> wrote:

>I’ve recorded the transmission of one of my friends using the IC-7300 
>recorder but unfortunately I can’t seem to be able to retransmit it that 
>recording back to him so that he can hear it.
>What am I doing wrong here? Any help would be greatly appreciated.
>----
>Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>Icom Users Net: Sundays, 1700Z, 14.316 MHz
>Icom FAQ: http://www.qsl.net/icom/
>To support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html