[ICOM] IC-761 CIV interface

[Dave AA6YQ]

Connected to a transceiver control application via a CI-V interface, an IC-761's current frequency and mode can both be tracked and
modified.

        73,

           Dave, AA6YQ

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of U Sidarau
Sent: Thursday, November 17, 2016 10:14 AM
To: 'ICOM Reflector'
Subject: Re: [ICOM] IC-761 CIV interface

A CI-V interface is in there, though the list of commands available is not impressive. If memory serves correctly, you can only get
band and mode data travelling both ways. I think, there is even no freq read-out. No "PTT via CI-V" for sure, you have to do it by
separate hardware (the old good dingle transistor key).

73,

Vlad VE3IAE

--  

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of John & Connie Broc k
Sent: Thursday, November 17, 2016 9:42 AM
To: icom at mailman.qth.net
Subject: [ICOM] IC-761 CIV interface

I am planning to work some digital modes on my IC-761.

Looking at an external sound card/interface box to connect to my PC.

Looking at some info it appears that Icom implemented some sort of CIV computer interface on this rig.

Does anyone know what functions are available other than RCV and Xmit control?

Any frequency control?

 

Tnx

John 

WA8UGM

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
http://www.qsl.net/icom/ To support QSL/QTH.net: http://www.qsl.net/donate.html