[ICOM] 60 m on 756 Pro iii

[KK2DOG in NY]

While my 756PRO was in the shop getting the tuner fixed, I asked if the 60-meter mod could be done too,
but the tech recommended against it so I didn't have it done.


                      Mike KK2DOG



________________________________________
From: Icom <icom-bounces at mailman.qth.net> on behalf of Doug Renwick <ve5ra at sasktel.net>o
Sent: Sunday, March 13, 2016 6:25 PM
To: 'ICOM Reflector'
Subject: Re: [ICOM] 60 m on 756 Pro iii

I just opened up my transmit on my Canadian Pro III and use it without
problems on 60m.
Doug

I wasn't born in Saskatchewan, but I got here as soon as I could.

-----Original Message-----

I wouldn't try 60 meters at all unless the rig had it originally and that
goes for the PRO3 , don't
attempt it unless you use 50 watt output or less. Anything higher power will
burn up components
in the low pass filter of the PA.
The PRO3 should be good all modes and if yours is not working right try a
full CPU reset to get
all modes back.

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Michael
Weissman, M.D.
Sent: Sunday, March 13, 2016 11:52 AM
To: ICOM Reflector <icom at mailman.qth.net>
Subject: [ICOM] 60 m on 756 Pro iii

Is there a way to add CW / RTTY and the new channels to an original 756
Pro iii.  Mine only works on SSB.

Thanks,


73,  Mike
K2CBI


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html