[ICOM] 60 m on 756 Pro iii

[Doug Renwick]

I just opened up my transmit on my Canadian Pro III and use it without
problems on 60m.
Doug

I wasn't born in Saskatchewan, but I got here as soon as I could.

-----Original Message-----

I wouldn't try 60 meters at all unless the rig had it originally and that
goes for the PRO3 , don't
attempt it unless you use 50 watt output or less. Anything higher power will
burn up components
in the low pass filter of the PA.
The PRO3 should be good all modes and if yours is not working right try a
full CPU reset to get
all modes back.

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Michael
Weissman, M.D.
Sent: Sunday, March 13, 2016 11:52 AM
To: ICOM Reflector <icom at mailman.qth.net>
Subject: [ICOM] 60 m on 756 Pro iii

Is there a way to add CW / RTTY and the new channels to an original 756 
Pro iii.  Mine only works on SSB.

Thanks,


73,  Mike
K2CBI


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus