[ICOM] 746

[Kelly Taylor]

Wouldn't a bad or shorted filter make the radio sound dead? I tend to go with the reset-turned-off-filter-settings theory. 

Kelly
ve4xt 

Sent from my iPhone

> On Jan 30, 2016, at 3:24 PM, Gary Fiber <gfiber at comcast.net> wrote:
> 
> You might also just gently pull up on the filter. I have seen the filter case short to the mounting holes. Sometimes placing some electrical tape on the filter bottom will prevent it from happening. Could also be a filter that has gone bad.
> 
> Gary P. Fiber K8IZ
> gfiber1952 at gmail.com
> gfiber at comcast.net
> 
> 
> 
> 
>> On Jan 30, 2016, at 2:10 PM, Lloyd Curry <lloyd.na4d at gmail.com> wrote:
>> 
>> I have an original Icom 746 (non-pro) with the 500 hz cw filter. The
>> filter has stopped working. When I push in the filter button the "nar"
>> appears on the screen but there is no change in the audio or bandwith.
>> Any ideas?
>> 
>> -- 
>> Lloyd C. Curry
>> Amateur Radio NA4D
>> Greensburg, KY
>> 
>> I'm so nice I wish I had a friend just like me.
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html