[ICOM] 746

[Gary Fiber]

I had forgot a full reset would likely set everything back to default including turning off the filter settings. It is possible you may need to remove a cover to See which position the filter is installed into. I had to do that with my IC-706MK II. Hope this helps.

Gary P. Fiber K8IZ
gfiber1952 at gmail.com
gfiber at comcast.net




> On Jan 30, 2016, at 10:50 PM, Lloyd Curry <lloyd.na4d at gmail.com> wrote:
> 
> Have not been in the menus. I did a full reset. Why would that remove
> the filter?
> 
>> On Sat, Jan 30, 2016 at 6:41 PM, John Geiger <af5cc2 at gmail.com> wrote:
>> Also, did you a full reset or somehow get into the menus and assign the
>> filter to a different location that is empty?
>> 
>>> On Sat, Jan 30, 2016 at 5:24 PM, Gary Fiber <gfiber at comcast.net> wrote:
>>> 
>>> You might also just gently pull up on the filter. I have seen the filter
>>> case short to the mounting holes. Sometimes placing some electrical tape on
>>> the filter bottom will prevent it from happening. Could also be a filter
>>> that has gone bad.
>>> 
>>> Gary P. Fiber K8IZ
>>> gfiber1952 at gmail.com
>>> gfiber at comcast.net
>>> 
>>> 
>>> 
>>> 
>>>> On Jan 30, 2016, at 2:10 PM, Lloyd Curry <lloyd.na4d at gmail.com> wrote:
>>>> 
>>>> I have an original Icom 746 (non-pro) with the 500 hz cw filter. The
>>>> filter has stopped working. When I push in the filter button the "nar"
>>>> appears on the screen but there is no change in the audio or bandwith.
>>>> Any ideas?
>>>> 
>>>> --
>>>> Lloyd C. Curry
>>>> Amateur Radio NA4D
>>>> Greensburg, KY
>>>> 
>>>> I'm so nice I wish I had a friend just like me.
>>>> ----
>>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>>> Icom FAQ: http://www.qsl.net/icom/
>>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>> 
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> 
> 
> 
> -- 
> Lloyd C. Curry
> Amateur Radio NA4D
> Greensburg, KY
> 
> I'm so nice I wish I had a friend just like me.
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html