[ICOM] Internal tuners

[Tony Hwang]

Hi,
Belated happy new year.
Is the amp. input side capable of tuning 10MHz band?
73,
VE6CGX

  Dwayne wrote:
> Tnx Julio,,  Oh and about the 200watts,, Yes I think you folks in the 
> states are limited to 200 w,,and I can understand that reg. only 50 
> Khz.  I have never driven this amp up to its limit,, But my thinking 
> is to get up to 250 (thats what this 775 will do ) Its easier on the 
> radio.. with helpfrom the amp.. Useing this 775 is like driving one's 
> Town Car to work everyday...
>
>  Tnx everyone
> ----- Original Message ----- From: "Julio Peralta" 
> <jperalta4 at verizon.net>
> To: "'ICOM Reflector'" <icom at mailman.qth.net>
> Sent: Saturday, January 09, 2016 1:18 PM
> Subject: Re: [ICOM] Internal tuners
>
>
>> I think the rule of thumb is not to run an auto tuner in a rig into 
>> another auto tuner either a standalone tuner or an auto tuner 
>> built-in to an amp.
>>
>> I think you're OK running it into your amp.
>>
>> Julio, W4HY
>>
>> -----Original Message-----
>> From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Dwayne
>> Sent: Saturday, January 09, 2016 3:03 PM
>> To: ICOM Reflector
>> Subject: Re: [ICOM] Internal tuners
>>
>> H i Fern tnx for the reply..  Well I have heard that on the air and 
>> quiet sure I have read that on the internet some where and just 
>> wanted to be sure..  Dwayne
>> ----- Original Message -----
>> From: "Fern Rivard" <crc at cyberlink.ca>
>> To: "ICOM Reflector" <icom at mailman.qth.net>
>> Sent: Saturday, January 09, 2016 12:47 PM
>> Subject: Re: [ICOM] Internal tuners
>>
>>
>>> Who said that Dwayne?  I don’t see any reason as to why you can’t use
>>> the tuner on 10 mhz.
>>> Fern
>>>
>>>
>>> -----Original Message-----
>>> From: Dwayne
>>> Sent: Saturday, January 09, 2016 12:20 PM
>>> To: ICOM Reflector
>>> Subject: [ICOM] Internal tuners
>>>
>>> Hi Name is Dwayne  (ve6qx).. I'am trying to understand why its not a
>>> good idea to have the internal tuner in my Ic-775 Dsp on when driving
>>> a pair of 3-500's  grounded grid..  The reson I want to do this is
>>> because on 10 Mhz.  the input circuit to the amp has a s w r of about
>>> 1.9,, because the amp was built before 10 mhz. became popular to 
>>> use.. They used the same
>>> inpuit circuit for 10 mhz. as 14 mhz.    Anyone who can offer a good
>>> answer please..
>>>  Dwayne
>>>
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom
>>> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
>>> http://www.qsl.net/icom/ To support QSL/QTH.net:
>>> http://www.qsl.net/donate.html
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom
>>> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ:
>>> http://www.qsl.net/icom/ To support QSL/QTH.net:
>>> http://www.qsl.net/donate.html
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom 
>> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
>> http://www.qsl.net/icom/ To support QSL/QTH.net: 
>> http://www.qsl.net/donate.html
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html 
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html