[ICOM] Icom 756 ACC jack and VOX

[John Geiger]

Hi Larry,

Thanks for clearing that up for me.

73 John AF5CC

On Sat, Feb 13, 2016 at 5:50 PM, Larry Young <k4lxv at bellsouth.net> wrote:

> As has been stated before John, The VOX only works through the front panel
> microphone connector. The rear panel acc audio input will not activate the
> VOX. Also, a higher audio input level is required when using the rear acc
> audio input. Please refer to the manual for the proper levels.
> Larry K4LXV
>
>
>     On Saturday, February 13, 2016 5:00 PM, John Geiger <af5cc2 at gmail.com>
> wrote:
>
>
>  I have fixed the VOX issue I was having with hooking the mic jack of my
> Icom 756 original to a lap top computer.  It is working fine now and I made
> a few QSOs in the RTTY WPX contest this morning. Still, it would be easier
> overall to hook it to the 8 pin ACC jack in the rear of the transceiver,
> and I could also use the computer as a voice keyer when hooked up this way.
>
> Does the VOX circuit work on that jack as well?  I don't currently have a 8
> PIN DIN jack to wire stuff up and to check it out firsthand.
>
> 73 John AF5CC
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
>
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html