[ICOM] Icom 756 ACC jack and VOX

[Larry Young]

As has been stated before John, The VOX only works through the front panel microphone connector. The rear panel acc audio input will not activate the VOX. Also, a higher audio input level is required when using the rear acc audio input. Please refer to the manual for the proper levels.
Larry K4LXV
  

    On Saturday, February 13, 2016 5:00 PM, John Geiger <af5cc2 at gmail.com> wrote:
 

 I have fixed the VOX issue I was having with hooking the mic jack of my
Icom 756 original to a lap top computer.  It is working fine now and I made
a few QSOs in the RTTY WPX contest this morning. Still, it would be easier
overall to hook it to the 8 pin ACC jack in the rear of the transceiver,
and I could also use the computer as a voice keyer when hooked up this way.

Does the VOX circuit work on that jack as well?  I don't currently have a 8
PIN DIN jack to wire stuff up and to check it out firsthand.

73 John AF5CC
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html