[ICOM] Icom 7000 question

John Geiger af5cc2 at gmail.com
Wed Aug 17 10:35:17 EDT 2016


Yes, the manual didn't say anything about this, but I think the 7000 would
be like that also.

73 John AF5CC

On Wed, Aug 17, 2016 at 8:54 AM, KK2DOG in NY <kk2dog at hotmail.com> wrote:

> My 706MKIIG stays at the last power level used on each band. I don't see
> why the 7000 wouldn't either.
>
>
>
>              Mike KK2DOG
>
>
> ________________________________
> From: Icom <icom-bounces at mailman.qth.net> on behalf of Patrick - KB8RTZ <
> kb8rtz at oh.rr.com>
> Sent: Tuesday, August 16, 2016 11:58:04 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] Icom 7000 question
>
> I just perused the manual and found nothing indicating setting output
> power by band in vfo mode. However, the hand mic has programmable keys.
> Perhaps that is a work around?
>
> 73 ... Patrick ...
>
> —————————————————————————
>
> On Aug 16, 2016, at 22:18, John Geiger <af5cc2 at gmail.com> wrote:
>
> On the Icom 7000, can the power level be set differently for HF, 6, 2, and
> 440?  For example, putting out 100% power on HF, 50% power on 6m, 25% on 2m
> and 30% on 70cm?
>
> 73 John AF5CC
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>


More information about the Icom mailing list