[ICOM] 765 Power Delay update

[Marc & Tricia Niebergall]

Randy,

Eric had a few left over.  Don't know how many.  That is the only source I
am aware of. His call is K2CB.

Marc

On Fri, May 1, 2015 at 3:22 AM, rrocket88 at netzero.net <rrocket88 at netzero.net
> wrote:

> Marc, thank you for the information , is there a source for the IC-1 or
> was it just a part Eric had in stock ?
> Thanks  de Randy K4IMZ
>
> ---------- Original Message ----------
> From: "Marc & Tricia Niebergall" <mtniebs at gmail.com>
> To: ICOM Reflector <icom at mailman.qth.net>
> Subject: [ICOM] 765 Power Delay update
> Date: Thu, 30 Apr 2015 16:10:35 -0700
>
> Thanks to all the contributors who helped to solve this minor annoyance. It
> is now working as advertised thanks to Gary, who pointed me in the
> direction of the Photo Interrupter IC-1, and Eric, who supplied me with the
> part. In the process of troubleshooting, I chose to change all the
> electrolytics, and while not solving the problem, it did bring the power
> supply up to date with some new parts.  The rig seemed to show signs of
> improvement with the installation of the new electroytics, but there
> remained and occasional pause after the rig had cooled down for a spell. So
> the last part I installed was IC-1 and it instantly powered on from a cold
> start.  The actual delay designed into the rig is for a delay of only a few
> milliseconds.  It works like a champ now.
>
> Hope this information will provide some help to others experiencing a
> similar problem with their IC-765 or 761 or any Icom rig with similar power
> supply design.
>
> Cheers,
> Marc-k7wxk
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>