[ICOM] IC02AT Question

[Dave Edwards]

Hey Bry...Dave here (from SKCC...recent T60-2NT QSO).
Anyway....Try programming first on a standard frequency...like a minus 
offset on 146.70 receive frequency.
Yes...it would not allow you to program offsets that would take you out 
of the band, and quite possibly....would not let you program offsets 
that were not used back then ...but are now. That is why you should 
first see if you can make it work on 31-91, or 34-94.
I have two or three of them myself.
...Dave



On 1/16/15 7:53 AM, bcarling at cfl.rr.com wrote:
> By the way, I bought the antenna for this new on eBay for $5 including shipping, and about
> $15 or $20 for a battery pack. Not bad... now if I can just program the offsets!
>
> On 16 Jan 2015 at 7:12, bcarling at cfl.rr.com wrote:
>
>> Hi folks - I don't seem to be able to get the +600  /  -600 selection to activate on my old
>> IC02AT.
>>
>> Is there some restriction for some of the settings that I am missing here?
>>
>> Bry AF4K
>>
>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>