[ICOM] SWR problem on 706Mk2G

[Tony Hwang]

Hi,
Then I'd suspect those two bands final PA section is suspect.
Maybe previous owner misused them or something.
GL, TS'ing.
73,
Tony, VE6CGX

John Geiger wrote:
> Yes, those antennas are ok on other rigs.
>
> 73 John zAG5CC
>
>
> On Saturday, December 19, 2015, Tony Hwang <dragon40 at shaw.ca> wrote:
>
>> Hi,
>> Do you have dummy load?
>> Noise bridge?
>> Sure your 6m and 15m band antenna is tuned alright or tested with
>> other radio?
>> 73,
>> Tony, VE6CGX
>>
>> John Geiger wrote:
>>
>>> I recently purchased a used ICOM 706MK2G and it seems to have swr meter
>>> issues on a couple of bands.  This occurs on 15 and 6 meters where the swr
>>> is reading higher than what it should.  Has anyone seen this before, or
>>> knows how to fix it?
>>> I tried tightening the circuit board screws and that didn't fix it.
>>>
>>> 73
>>> John AF5CC
>>> ----
>>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>>> Icom FAQ: http://www.qsl.net/icom/
>>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>>
>>>
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>